Executive Summary - Specification and Supply Position
TL;DR - The Mistairhome WL-QH01S (PRO) holds 410 mL and mists 44 mL per hour or 21.3 mL per hour, which is 9.3 hours and 19.2 hours per fill; it covers 12 sq m (125 sq ft) at a 2.6 m ceiling and measures 25.4 dB on the high step and 22.8 dB on the sleep step; it draws 2.6 W and runs from USB-C 5V/1A, runs from a laptop port or a phone charger; no internal cell on this build; it weighs 385 g and measures 10.4 x 10.4 x 18.6 cm, and ships documented to CE / RoHS / FCC standards for import into Nigeria. MOQ is 200 units per SKU with a 20-30-day lead time, FOB Shenzhen or EXW Longgang.
China Wanlin supplies the Quiet Humidifier for Sleep with All Lights Off category as a direct manufacturer, not as a trading intermediary. The unit described below is one configuration out of 24 combinations (8 chassis x 3 SKU builds) that share a common misting family, a common tank and seal line and a common documentation set, so a distributor can build a coherent shelf from one source rather than stitching together unrelated suppliers. Every unit referenced on this page corresponds to a specific bill of materials held on file, so the figures below can be reproduced or independently verified at sample stage.
Full specification of WL-QH01S-PRO:
| Misting method | Ultrasonic piezo disc at 1.7 MHz on a floating silicone isolator, cool mist, no heater in the path |
| Tank capacity | 410 mL |
| Mist output on the high step | 44 mL per hour |
| Mist output on the low step | 21.3 mL per hour |
| Run time per fill on the high step | 9.3 hours |
| Run time per fill on the low step | 19.2 hours |
| Coverage area | 12 sq m (125 sq ft) at a 2.6 m ceiling |
| Noise at 1 m on the high step | 25.4 dB |
| Noise at 1 m on the sleep step | 22.8 dB |
| Water type | Tap water or distilled; a demineralisation cartridge drops into the tank neck |
| Mineral dust handling | Cartridge optional, recommended wherever the supply is hard |
| Fill method | Wide top opening, filled in place from a jug |
| Battery pack | Not fitted, runs from the USB-C supply |
| Cordless run time | Not applicable, mains or USB powered |
| Charge time | Not applicable, no internal cell |
| Power input | USB-C 5V/1A, runs from a laptop port or a phone charger |
| Rated power on the high step | 2.6 W |
| Control interface | Touch strip with three mist steps, sleep mode and a two, four or eight hour timer |
| Night light | Amber ring below 4 lux, dimmable to fully dark |
| Protection | Dry-run shut-off by tank float, tilt switch, overcurrent limit on the adapter |
| Dimensions | 10.4 x 10.4 x 18.6 cm |
| Weight | 385 g |
| Warranty | 12 months |
Shipping configuration: Pro build, + spare misting disc + demineralisation cartridge + multilingual manual. Master carton holds 48 units. Stated lead time is 20-30 days from order confirmation and deposit. Misting discs, wicks and cartridges are repeat line items and are ordered separately from the appliance.
Why Buyers Are Sourcing This Category Now
The strongest pull in Nigeria now comes from hospitality, clinical and facilities buyers rather than households, because they can put a number on complaints and on room-turn time, which makes the decision easy to defend internally. Channel structure follows a stable pattern: importers take container volumes, regional distributors break bulk into pharmacy, hospitality and facilities supply, and online sellers absorb the mixed-SKU remainder that suits catalogue breadth.
Distributors handling Quiet Humidifier for Sleep with All Lights Off lines consistently find that the repeat revenue sits in the consumable, in cartridges and wicks and replacement discs, rather than in the appliance. This is why the table above states figures by model rather than by marketing tier: a buyer comparing two SKUs needs the noise on the sleep step, the run time per fill and the water handling side by side, because those three predict both satisfaction and return rates better than any other set.
Wanlin serves Nigeria through three programmes that suit different balance sheets. New partners start with sample evaluation then a mixed trial order. Established distributors move to scheduled container shipments with locked pricing windows. Brand owners run private-label programmes with their own artwork and manuals. In all three cases the factory documentation, including the certificates and battery files listed further down this page, references the specific model code on the order rather than a generic family certificate, which is the most common cause of customs delay in this category. On the WL-QH01S (PRO) the figures worth carrying into the next order are the 410 mL tank, the 19.2 hours per fill on the low step, and the 22.8 dB reading on the sleep step.
Engineering Notes - Noise, Mist Output and Water Quality
Three engineering decisions separate this platform from the commodity end of the category. The first is how quiet is stated. A decibel figure without a distance, a room and a step is not a specification, so we publish the conditions next to the number: measured at one metre in a semi-anechoic corner, and quoted separately for the high step and the sleep step. The sleep-step figure is the one that belongs in a tender document, because it is the step an occupant actually leaves the unit on all night.
The second is where the noise comes from, because that decides how far it can be pushed down. Three sources remain once the fan is removed: the disc drive frequency, the turbulence at the outlet, and the structure-borne path into whatever the unit stands on. The first is handled by driving the disc below its resonant peak, the second by a low-turbulence outlet grille, and the third by a floating silicone isolator - which is why a unit reads measurably louder on a hollow bedside table than on a carpet, and why we quote the distance rather than letting a buyer assume.
The third is the trade that nobody states. Quieter costs output: a disc driven below resonance moves less water, and a restricted outlet moves less air. Rather than hide that, we publish both steps and let the buyer decide which one the room needs. On the WL-QH01S (PRO) the figures worth carrying into the next order are the 410 mL tank, the 19.2 hours per fill on the low step, and the 22.8 dB reading on the sleep step.
Featured Deployment and Field Case Records
Three deployment records from the Quiet Humidifier for Sleep with All Lights Off programme, each with the conditions that shaped it. Site detail is kept because it is the part that transfers: the water, the ceiling, the rota and the complaint are what decide whether a unit stays in service, and none of them appear on a specification sheet.
Case Study 1: Da Nang, Vietnam
Deployment: A hospital supply distributor covering central Vietnam
Timing: Sixteen months from May 2025
The distributor serves both hospital and retail channels, and the documentation requirements differ between them. Certificates issued per model code rather than per family let the same container serve both channels without a second test round, which is a practical advantage that shows up in the landed cost rather than in the unit price.
Case Study 2: Calgary, Canada
Deployment: A 140-room hotel whose heating plant dries guest rooms to below 25 percent RH for five months of the year
Timing: One full winter, November 2025 to April 2026
Housekeeping was the deciding department, not engineering. Anything that had to be carried to a sink inverted added time to every room turned, so the narrow-neck models were rejected on the first day of the trial regardless of how they performed. The top-fill chassis cut the refill step to under a minute from a jug, and the hotel placed a repeat order for the remaining floors in February rather than waiting for the season to end.
Case Study 3: Utrecht, Netherlands
Deployment: A housing association retrofitting 380 apartments built before 1980 with mechanical ventilation
Timing: Two heating seasons from October 2024
Mechanically ventilated apartments lose moisture faster than occupants expect, and the association had been fielding complaints about dry throats and static for years. The issue was placement: one unit per apartment in the living room does nothing for the bedroom, so the specification became one compact unit per bedroom and one larger unit per living room. Complaints fell sharply and the association has since written the ratio into its retrofit standard.
The pattern across all three is that the deciding factor was never peak output. It was whether the tank lasted a full shift, whether the unit could be cleaned inside the time a round allows, and whether anyone complained about the noise or the dust. Those are the questions we ask before quoting. The WL-QH01S (PRO) packs 48 units to a carton, carries a 12 months warranty and a 20-30 days stated lead time, and draws 2.6 W on the high step.
Application Scenarios Across Bedrooms, Offices and Wards
Four placement patterns cover most of the enquiries we see for this category. The useful observation is that each one is answered by configuration and placement rather than by buying a larger unit, which is the default reflex and usually the wrong one.
| Scenario | Room or site | What the site needs | What the unit does |
| SC01-NURSERY | Night feeds and settled sleep in a room shared with an infant | Nothing should wake a sleeping infant, and no lamp should be on when the room is dark. | The sleep step holds output low all night while the chassis stays under the ambient level of a quiet bedroom, and the night light can be switched off entirely rather than merely dimmed. |
| SC02-BEDSIDE | A nightstand beside an adult bed in a heated room | A unit that has to be refilled at two in the morning stops being used inside a week. | A tank sized for a night plus part of the following day on the low step, with a level window that can be read from standing height before the light goes out. |
| SC03-WORKSTATION | Individual desks on an open-plan floor served by mechanical ventilation | A corridor or ceiling-mounted unit cannot reach a desk when the supply diffuser is moving air. | One compact unit per desk cluster sits inside the two-metre radius where the plume is still airborne, which is a placement answer rather than an output answer. |
| SC04-LIGHTS | Rooms where occupants sleep with the light off and wake if anything glows | A lamp that can only be dimmed and not extinguished is the most common reason a unit gets unplugged. | The night light switches to fully dark, the status indicator sits behind the outlet grille, and the display dims to nothing without changing the mist output. |
Two of these four are decided before the unit is switched on: whether the tank lasts the interval the site can actually service, and whether the cleaning task fits the round. For this configuration that means 21.3 mL per hour at 22.8 dB, holding 19.2 hours per fill across a 12 sq m (125 sq ft) room.
What a Factory-Direct Programme Changes for the Buyer
The practical advantage of a factory programme is flexibility in how the first order is shaped, not the unit price. A mixed container across three SKUs lets a distributor test a range without committing to full container quantities on unproven models, which is the single biggest risk reduction available to a new importer and one that intermediaries rarely offer because it complicates their own purchasing.
The second advantage is lead-time honesty. A stated lead time of 15 to 35 days measured from order confirmation and deposit, written on the proforma invoice rather than left open, is worth more to a buyer planning a season than a faster number that slips. Battery shipments add a documentation step at booking, which we handle but which needs a few extra days on the freight side, and we say so before the order rather than after.
The third is continuity. Tooling, mouldings and the documentation set stay the same across seasons, so a distributor who lists a model code this year can relist it next year without a new test round. On the WL-QH01S (PRO) the figures worth carrying into the next order are the 410 mL tank, the 19.2 hours per fill on the low step, and the 22.8 dB reading on the sleep step.
Certification, Water Quality and Market Access
Four documentation errors account for most of the customs delay we are asked to fix, and all four are avoidable at quotation stage. The first is a certificate naming a family rather than the model code on the invoice. The second is a battery build shipped without UN38.3 and MSDS. The third is a manual in the wrong language for the destination. The fourth is a plug that does not match the destination.
None of those are engineering problems. They are paperwork problems, and they are the reason we ask three questions before quoting: which markets, which languages on the manual and the artwork, and whether any unit in the order carries a cell. Answering those three costs a buyer five minutes and removes the majority of the delay risk.
What we will not do is back-date a certificate or issue one against a model we did not build. A buyer who needs that is a buyer whose shipment will be stopped eventually, and the cost of the test is always smaller than the cost of the container sitting at the port. The WL-QH01S (PRO) packs 48 units to a carton, carries a 12 months warranty and a 20-30 days stated lead time, and draws 2.6 W on the high step.
Unit Economics, Consumables and Order Sizing
Order sizing in this category is a volume question before it is a quantity question, because the units differ in size by more than an order of magnitude across the range. A master carton of this model holds 48 units at 0.123 cubic metres, which puts roughly 8,256 units in a 20 ft container and 18,192 units in a 40 ft container on a pure volume basis.
That figure is the starting point, not the answer. Palletisation, loading losses and the mix of SKUs in the container all pull it down, and a mixed container across three SKUs will not hit the single-SKU number. We run the mix with the buyer before quoting freight, because the difference between a planned and an unplanned container is usually one extra shipment a season.
The second sizing decision is the spares ratio, which most first-time buyers set too low. One spare disc per twenty units and one cartridge per unit on hard water is the ratio that prevents the awkward second shipment, and the parts are cheap enough that over-ordering them costs less than the freight of a top-up. The WL-QH01S (PRO) packs 48 units to a carton, carries a 12 months warranty and a 20-30 days stated lead time, and draws 2.6 W on the high step.
Buyer Questions Answered
What is the minimum order quantity for a first quiet humidifier order?
MOQ is 200 units per SKU for standard builds and 300 units for custom colour or private-label packaging. Mixed-container orders combining several models are accepted as long as each individual SKU clears its own minimum. The specification table on this page shows the exact build we ship for WL-QH01S-PRO.
How is the noise figure measured, and what does it mean in a bedroom?
We measure at one metre in a semi-anechoic corner and quote the step, so the two published figures for WL-QH01S are 25.4 dB on the high step and 22.8 dB on the sleep step. The sleep-step figure is the one to compare, because it is the step a bedroom unit is left on all night. A buyer can repeat the measurement in a quiet room with a phone application and will get within a decibel or two.
Does this humidifier leave white mineral dust on furniture?
It depends on the water and on the misting method, and it is the single largest cause of returns in this category. An ultrasonic disc throws everything dissolved in the water into the air, so on a hard supply it leaves a fine white mineral film on dark surfaces within days. Two answers exist: a demineralisation cartridge in the tank, which is a consumable with a real working life, or an evaporative build where the minerals stay in the wick. This unit is specified as cartridge optional, recommended wherever the supply is hard.
Which compliance files ship with a quiet humidifier order?
The standard file set is the CE technical file, RoHS and REACH declarations, an EMC test report, the IEC 60335-1 household appliance safety report, and for battery builds a UN38.3 test report with an IEC 62133 cell report and MSDS. For North America we add FCC documentation for the digitally controlled models. Certificates are issued against WL-QH01S, the model code on the order, rather than against a generic family.
Can we sell these under our own brand, with our own packaging?
Yes. Private label covers housing colour, logo placement, retail artwork, manual language and the accessory kit, and most of it sits inside existing tooling for this range, so customisation does not mean re-engineering. The decision we ask buyers to make early is which consumables travel with the appliance, because a unit sold without a cartridge into a hard-water market generates complaints that no artwork will fix.
How often does the unit need cleaning, and what does that involve?
Every five to seven days in continuous use, with a full dry-out if the unit will stand unused. That interval is why we specify a wide tank opening on this chassis: a tank a hand cannot reach into is a tank that never gets cleaned properly. Biofilm in standing water is the underlying reason, and it is not a defect, it is what water at room temperature does.
What warranty and spares support do you provide?
12 months against manufacturing defect on WL-QH01S. Misting discs, wicks, cartridges, seals and cells are stocked as separate line items and can ride in the same container as the units, which is the cheapest way to buy them. We suggest one spare disc per twenty units and one cartridge per unit where the water is hard.
How long does sampling and first production take?
Samples ship in 5 to 7 working days from an existing specification, or 15 to 20 days if a custom colour is required. First production runs in 20-30 days depending on SKU and quantity, measured from order confirmation and deposit, with the exact figure stated on the proforma invoice rather than left open. Battery shipments add a documentation step at booking.
Who This Programme Suits
Five kinds of partner buy this programme, and they want different things from it. Importers want container economics and documentation they can hand to a broker without rewriting. Regional distributors want a range coherent enough to explain on one page, and a spares line they can actually stock.
Brand owners want the artwork and the manuals right and the chassis underneath unchanged, which is the easiest request we handle because most of it sits inside existing tooling. Pharmacy and home-care groups want the consumable, because the repeat revenue is there rather than in the appliance. Cross-border sellers want prep: barcodes, multilingual manuals and packaging that survives a fulfilment centre.
Export traders sit across all five, and the thing they ask for most often is a specification sheet they can forward without editing, because their customer will ask about noise, run time and water before asking about price. On the WL-QH01S (PRO) the figures worth carrying into the next order are the 410 mL tank, the 19.2 hours per fill on the low step, and the 22.8 dB reading on the sleep step.
How a First Order Is Structured
First orders go wrong in two predictable places, and both are administrative. The first is documentation raised against the wrong model code, which stops a container at the destination for a reason that has nothing to do with the product. The second is a packing list decided after production begins, which forces either a second shipment or a compromise on the spares.
The sequence that avoids both is short. Agree the specification and the destination list, evaluate a sample on that specification, confirm the packing list including consumables, then release production against a stated lead time written on the proforma invoice.
For a buyer new to the category we also suggest a mixed container across two or three SKUs rather than a single-SKU container, because the sell-through data from one mixed shipment is worth more than any forecast either side can produce in advance. For this configuration that means 21.3 mL per hour at 22.8 dB, holding 19.2 hours per fill across a 12 sq m (125 sq ft) room.
Next Step for Import Buyers
The right way to evaluate this unit is to order a sample on this specification and measure it: mist output by a weighed run, run time per fill at the low step, and noise at one metre in a quiet room on both steps. All three are reproducible, and a buyer who runs them will know more in an afternoon than any datasheet can convey.
We publish figures that can be checked, we state the ceiling height behind the coverage number, and we say plainly where the honest answer depends on the room or the water. That is a narrower claim than some competitors make, and it is the one we can stand behind at sample stage.
Export enquiries are welcome from distributors, brand owners, pharmacy and home-care groups, hospitality operators, cross-border sellers and export traders. Samples, specification sheets and the certification and battery files are available on request. For this configuration that means 21.3 mL per hour at 22.8 dB, holding 19.2 hours per fill across a 12 sq m (125 sq ft) room.
Published by: Wanlin Manufacturing Group, MistAirHome Export Division
Published on: September 28, 2026
Data sources: in-house factory testing + misting disc and cell specifications + certification and battery files + partner deployment records
Company address: Wanlin Group, Building B, Building 1, Beisida Medical Device Building, 28 Nantong Avenue, Baolong Community, Baolong Sub-district, Longgang District, Shenzhen, Guangdong, China
References: factory quality manual + third-party test reports + customer shipment records
Contact: Mistairhome@163.com / +8613261677119 / https://www.mistairhome.com